BUY NOW

CALL 01208 264999





Telephone: +44 (0)1208 264999

email: info@reactiveresins.com

OR CLICK HERE

TO BUY ONLINE

GRP hull gel peeled and ready to be coated with Safeguard epoxy coatings

Safeguard TC

EPOXY TIE COAT

SAFEGUARD TC is a low viscosity, two component epoxy tie coat developed for use as a primer for SYNERGY antifouling. It is also ideal for use where subsequent coatings or fillers are to be applied at a later date. SAFEGUARD TC can applied to new, uncured epoxy coatings or to old, abraded coatings and GRP

PREPARATION. SAFEGUARD TC should be applied to new coatings within their over-coating period. Cured coatings and other substrates must be clean, dry and free of grease, mould release agent or other contamination. If the surface is smooth or glossy it should be abraded to provide a key for the new coating.

MIXING Please click here for full mixing instructions

APPLICATION   SAFEGUARD TC can be applied by any method. Short pile mohair rollers provide an excellent finish. Foam rollers are unsuitable.

If the substrate is unacceptably rough a coat of EASY FAIR SEU can be applied first and sanded smooth.

APPLICATION CONDITIONS   Epoxy coatings should not be applied in temperatures of less than 7°C or to substrates less than 3°C above the dew point.

OVER-COATING Safeguard TC can be over-coated with most other coatings at any time after the minimum over-coating period. SYNERGY antifouling should be applied within the maximum time stated in the table below to ensure a chemical bond forms between the products.

SAFEGUARD TC, APPROXIMATE OVER-COATING TIMES & POT LIFE

TEMPERATURE ºC

5-15

15-25

25+


Min

Max

Min

Max

Min

Max

POT LIFE SYNAMIN 1058S

60 minutes

90 minutes

40 minutes

70 minutes

30 minutes

50 minutes

OVER-COATING TIME

NORMAL COATINGS

12 hours

UNLIMITED

8 hours

UNLIMITED

4 hours

 UNLIMITED

OVER-COATING TIME

SYNERGY

4 hours

36 hours

3 hours

30 hours

2 hours

24 hours

SAFEGUARD TC - SPECIFICATION

TYPE

Solvent born epoxy coating

Solids content

60%

Finish

Matt to eggshell

Weight

1.6 kg/litre

Coverage

8m2 per litre per coat

Mix ratio

100 parts resin to 16 parts hardener

Solvent

Synsol 50 epoxy solvent

Colours

Pale and mid grey

Pack sizes

1. 2.5 & 5 litre

VIEW & DOWNLOAD

LITERATURE