BUY NOW

CALL 01208 264999





Telephone: +44 (0)1208 264999

email: info@reactiveresins.com

Downloads

One coat of Conseal P and two coats of Conseal Utility were applied to this factory floor

Floor Coatings & Screeds


REACTIVE RESINS supply a comprehensive range of durable epoxy and polyurethane floor repair and finishing materials. They are made with the highest quality raw materials and have been developed to provide optimum wear and chemical resistance.

We are also able to supply acid resistant and anti-static grades of many of the products listed below.

If you do not see what you are looking for please contact us as we have many other products that are not listed here.

TIME SAVING PRIMERS

CONSEAL RAPID

Rapid cure, unpigmented, low solvent two part polyurethane/urea concrete primer that in most conditions is ready to re-coat in 20 minutes, thanks to the use of Advanced Cure Technology.

CONSEAL GREEN

Epoxy curing agent & primer for new green concrete. Allows the application of finishing treatments to concrete within 24-36 hours of casting.

CONSEAL WET

Primer for damp concrete and masonry substrates. Just pressure wash sound substrates, remove surplus water and apply CONSEAL WET

CONVENTIONAL EPOXY PRIMERS

CONSEAL DRY

Epoxy primer for  for application to cured concrete floors, tanks and structures where it will provide excellent adhesion together with good porosity and pin hole sealing properties.


CONSEAL LVP

CONSEAL LVP is a pure epoxy primer that has been developed for application to ground or blasted concrete. Due to it’s excellent penetration properties it is also suitable for application to power floated concrete provided that it does not have an excessively thick friable and dusty surface layer.

FLOOR TOP COATS

CONSEAL  CERAMIC

Abrasion resistant solvent free epoxy-ceramic coating for industrial floors. Virtually odourless, can be applied in thick coats and in poorly ventilated  areas.

CONSEAL UTILITY

Economical solvent free, mineral filled epoxy coating for industrial floors. Virtually odourless, can be applied in thick coats and in poorly ventilated  areas.

CRYSTALGUARD

Clear polyaspartic varnish. For protecting decorative and timber floors from abrasion. Rapid curing.

SYNACRYL FS

A clear, abrasion resistant coating for wooden and for decorative floors. A water based two part polyurethane coating that is easy to apply. Fast drying but with a long pot life.

MORTARS & SCREEDS

CONSEAL M

Epoxy mortar for seamless, easily cleanable floors floors. Made for to survive the toughest treatment. Usually laid 6 - 9 mm thick. Also useful for repairs to concrete steps etc.

CONSEAL SL

Epoxy self levelling compound for seamless, easily cleanable floors. Excellent for repairing damaged concrete floors, steps etc.

reactive-resins-floor-coatings-colour-chart.pdf Conseal Rapid Conseal SL Conseal M Crystalguard Conseal Utility Conseal  Ceramic Conseal LVP Conseal Dry Conseal Wet Conseal Green Synacryl floor sealer