SYNAMIN epoxy hardeners have been developed to produce the optimum physical properties combined with ease of use.SYNAMIN 200 series hardeners cure at ambient temperatures and can be used with all SYNTAC epoxy resins. The mixed resins can be used with a range of fillers, fibres and thickeners for numerous applications such as laminating, filleting, gluing, fairing, coating etc. The resin and hardener should be accurately weighed in their correct proportions - which are shown on the labels.
Convenient mix ratios make proportioning easy and less critical
Produces excellent properties when correctly mixed and cured
Wide range of products to suit all applications
SYNAMIN 201 is a cycloaliphatic diamine epoxy hardener with a pot life of 45 minutes at 20ºC.
SYNAMIN 201 has very low vapourpressure and a convenient mix ratio of 50% by weight of epoxy resin. It provides adequate physical properties for most marine applications.
SYNAMIN 220 is a cycloaliphatic diamine based epoxy adduct with a pot life of 25 minutes 20ºC. It is extremely resistant to carbonation or blooming and will cure to a glossy finish even in damp conditions.
SYNAMIN 220 has a mix ratio of 50% by weight of epoxy resin. Better physical properties than SYNAMIN 201.
SYNAMIN 260 is an aliphatic amine based rapid hardener with a pot life of 10 minutes at 20ºC. It quickly hardens which makes it useful for smaller repairs where time is of the essence.
SYNAMIN 1055is a slow curing amidoamine that when mixed with any SYNTAC Epoxy resin will adhere well to damp substrates such as wood, concrete etc. Produces the most waterproof coatings when used with SYNTAC EPAFD epoxy resin. Mix ratio 50% by weight of epoxy resin.