CALL 01208 264999
Telephone: +44 (0)1208 264999
Ideal for factory, warehouse and garage floors and much more…
The hardener cures quickly to allow the floor to be put back into use within a day or so, depending on the ambient temperature. CONSEAL UTILITY can be applied in temperatures down to 10oC.
CONSEAL coatings cure to produce a semi- gloss to gloss finish that is sufficiently slip resistant for most dry situations. For wet areas or where maximum slip resistance is required, we have a selection of non-slip additives that can be added to the coating to produce a variety of textures.
CONSEAL UTILITY is very easy to mix and apply and little skill is required to produce a good job, provided the mixing and application instructions are followed. It can be applied in one thick coat but the inexperienced applicator will achieve a more uniform finish by applying two thinner coats.
CONSEAL coatings are manufactured from the best quality raw materials under an ISO 9001 quality system. They are the result of considerable development work that has produced products of the highest durability, that are easy to apply and are unaffected by cold and damp during application. They can be applied in conditions that would prevent the successful application of many other coatings.
MIXING & APPLICATION It is of paramount importance that epoxy coatings are mixed according to detailed instructions which be accessed by using the links below.
|Epoxy Resin Guide|
|Coatings Mixing Instructions|
|Osmosis Repair Guide|
|Boat Bottom Areas|
|Boat Bottom Calculator|
|Planning the work|
|Inspecting & drying|
|Floor Coatings & Screeds|
|Steel & Tank Coatings|
|Terms & Conditions|