BUY NOW

CALL 01208 264999





Telephone: +44 (0)1208 264999

email: info@reactiveresins.com

Downloads

Conseal Green


EPOXY CURING AGENT AND PRIMER FOR NEW GREEN CONCRETE


ALLOWS THE APPLICATION OF FINISHING TREATMENTS TO CONCRETE

WITHIN 24 - 36 HOURS OF CASTING

CONSEAL GREEN is a two-part, low solvent, epoxy concrete primer that has a unique formulation that gives it the ability to mix with fresh wet concrete while still being resistant to diffusion of water through the uncured coating. This attribute enables CONSEAL GREEN to seal moisture into green concrete so that it is able to react with the cement causing it to fully cure, even outdoors in hot, dry conditions.

When CONSEAL GREEN and the cement in the concrete substrate cure, they chemically react together ensuring that the CONSEAL GREEN is permanently bonded to the concrete. The cured surface is far harder and more durable than concrete treated with conventional coatings in the usual way. When applied to new concrete immediately after laying CONSEAL GREEN also eliminates all floor preparation work and enables rapid job completion.

CONSEAL GREEN can be over-coated with top coats within 8 - 16 hours. Screeds of other floor finishing systems can be applied after 36 hours. This is to allow time for the green concrete to gain sufficient strength to withstand shrinkage of thick polymeric systems.

Conseal LVP is a pure epoxy that is suitable for priming shot blasted or diamond ground concrete